Request a Free Consultation Today! 281-350-4410
Your Personal Backyard Oasis
Custom Residential Pools Designed for Your Lifestyle
Tailored Designs to Fit Your Home
Every home is unique, and your pool should be too. Our experienced designers work closely with you to create a pool that complements your home’s architecture and suits your lifestyle. From the initial concept to the final touches, we ensure that every detail aligns with your preferences. Our design options include
Custom Shapes and Sizes: From classic rectangles to freeform designs.
Integrated Features: Such as tanning ledges, waterfalls, and swim-up bars.
Advanced Systems: Including automation, lighting, and energy-efficient equipment.
Our Pool Construction Process
With all of our pools, we want to make the construction process as simple and clear as possible.
Consultation
Our process begins with a personalized consultation where we take the time to understand your vision, lifestyle, and space. We’ll discuss your design preferences, budget, and any must-have features, while answering your questions and offering expert guidance. This step ensures we’re aligned with your goals before moving forward with the design phase.
Pre-Construction
The initial steps of the construction process may include tree removal, permit acquisition, and pool layout planning. If you do not have a gate or open access, fencing must be taken down. If fencing must be taken down, only the portion necessary to gain access and complete the construction process will be taken down.
Excavation of Site
Once the perimeter is marked, a bobcat tractor will excavate the dirt from the pool area. Remember that the hole will be a little larger than the finished size of your pool. This difference is for the gunite that forms the shell. It typically takes one day to complete excavation.
Steel ReBar Placement
Steel ReBar is used to form a frame on the floor and walls of your pool. This ReBar will be all over the pool – on the bottom, up the sides. Spacers are used so the ReBar is suspended above the ground and not against the dirt floor of the pool. This allows gunite to be under, around, and above the rebar. Gunite with steel ReBar combination forms a strong and long lasting pool shell.
Plumbing and Electrical Stub-Out
Light niches, skimmers, main drains etc. will be stubbed out prior to gunite application.
Gunite Application
Gunite is a spraying process that creates the pool shell. It is applied to both sides of the ReBar to suspend the bars within the walls and floor to form a very strong, solid structure. Water curing of the gunite is critical and you will be required to wet down the gunite 2 to 3 times per day for the first 5 days. This slows the gunite’s curing process, and helps minimize shrinkage cracks due to premature curing.
Plumbing/Electrical
The equipment set will be delivered to your location. The plumber and electrician will run pipes and conduit then install all the pool equipment.
Decking
Decking that surrounds your pool can be concrete, pea gravel, brick, stone, cool deck, tile or many other materials. Concrete decking around the pool is 4” minimum thickness with ReBar reinforcement throughout.
Pool Surfacing
The interior finish of the pool will be applied. Depending on your choice, it could be white marble plaster, Pebble Tec or one of the other selections that you have chosen. When the plaster is complete we will immediately begin filling the pool and/or spa. If your pool is Pebble Tec the pool will sit empty overnight. Our crew will come back the following day to acid wash and fill. Your pool water level needs to reach center of the waterline tile (the perimeter tile located at the top edge of your pool) or to the center of the skimmer. Your pool is then full and you may turn off the water. Do not turn the water off during the fill as this will cause a bathtub like ring to occur and stain your plaster.
Clean-Up
Debris will be cleaned away from both the interior and the exterior of the pool. If an exterior fence was taken down, it will be put back up at this time.
Start up
Your Supreme Pool representative will do the start-up of your pool equipment for the first time. The equipment will need to remain on for a full week to clear the water of any plaster dust or sediments. We will schedule a Pool School for you with one of our representatives. They will give you instructions, explanations, and demonstrations on the operations and use of your new pool. This will include easy methods to clean the filter, empty your skimmer baskets, and check your chemicals.
Quality Construction and Materials
Since 1981, Supreme Pools & Spas has been committed to building pools that stand the test of time. We use only the highest quality materials and construction techniques to ensure durability and longevity. Our team oversees every phase of the project, maintaining the highest standards of craftsmanship.
Choosing Supreme Pools & Spas means partnering with a company that values excellence, innovation, and customer satisfaction. Our professional designers offer innovative options, including various water features, lighting, automation, and more, to create a pool that is both functional and stunning.
Ready to Build Your Dream Pool?
Transform your backyard with a custom-designed pool and spa from Supreme Pools & Spas. Whether you're looking for a luxury retreat or a family-friendly oasis, we bring expertise, quality, and craftsmanship to every project.
Request a Free Consultation Today!
281-350-4410
Hear From Our Happy Customers
Experience, Quality, and Unmatched Craftsmanship
At Supreme Pools & Spas, we deliver exceptional craftsmanship, innovative designs, and top-tier service. With 40+ years of experience, we're Houston’s trusted name for custom pools and spas.
